Altiumcustomize

Design Rule Verification Report

Date : 27/06/2008
Time : 14:51:31
Elapsed Time : 00:00:00
Filename : D:\diego\board arm7 placa\placa lpc2114-V2.PcbDoc

Summary

Warnings Count
Drilled SMT Pads found 13
Total 13

Rule Violations Count
Room Esquema-lpc2114-V2 (Bounding Region = (92.9mm, 46.5mm, 138mm, 116.8mm) (InComponentClass('Esquema-lpc2114-V2')) 0
Short-Circuit Constraint (Allowed=No) (All),(All) 0
Broken-Net Constraint ( (All) ) 0
Clearance Constraint (Gap=0.2mm) (All),(All) 1
Width Constraint (Min=0.2mm) (Max=0.8mm) (Preferred=0.2mm) (All) 0
Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All) 0
Hole Size Constraint (Min=0.025mm) (Max=2.54mm) (All) 0
Total 1

Warnings

Drilled SMT Pads found
Pad S2-1(99.66mm,65.917mm) Bottom Layer
Pad S2-1(99.66mm,72.217mm) Bottom Layer
Pad S1-1(125.482mm,113.894mm) Bottom Layer
Pad S1-1(131.782mm,113.894mm) Bottom Layer
Pad R4-2(130.1mm,81.95mm) Bottom Layer
Pad R2-1(127.45mm,106.35mm) Bottom Layer
Pad R9-2(127.45mm,102.8mm) Bottom Layer
Pad R1-1(130mm,106.7mm) Bottom Layer
Pad JP1-1(126.45mm,78.95mm) Bottom Layer
Pad JP1-2(128.99mm,78.95mm) Bottom Layer
Pad D1-1(118.8mm,99.95mm) Bottom Layer
Pad D1-2(124.3mm,99.95mm) Bottom Layer
Pad C15-2(131.083mm,50.413mm) Bottom Layer
Back to top

Convert Found Drilled SMT Pads to MultiLayer Pads
Clearance Constraint (Gap=0.2mm) (All),(All)
Pad R4-1(124.6mm,81.95mm) Multi-Layer Track (118.64mm,81.26mm)(126.44mm,81.26mm) Bottom Layer
Back to top